ASI’s independent third-party Certification
ASI has developed an independent third-party Certification program to ensure sustainability and human rights principles are increasingly embedded in aluminium production, use and recycling. ASI’s Performance Standard and Chain of Custody Standard are designed to link responsible production with responsible sourcing, and thus support increased emphasis on sustainability in procurement practices.
More about Voluntary Standards Initiatives
LOLS10在线直播下注ASI is a of the ISEAL Alliance, the for credible sustainability standards, whose mission is to strengthen sustainability standards systems for the benefit of people and the environment. Other members include Forest Stewardship Council, Rainforest Alliance, Responsible Jewellery Council and Marine Stewardship Council. ASI complies with the criteria in ISEAL’s Codes of Good Practice for Standard-Setting, Assurance and Impacts.
Uses of aluminium
Aluminium’s applications include:
- Transport: Lower GHG emissions through lighter vehicles and through its recyclability
- Infrastructure: Bringing energy efficiency for cities and buildings in an energy constrained world
- Packaging: Preserving food and medicines through its unique barrier properties.
LOLS10在线直播下注The production of aluminium for use in these applications has direct and indirect impacts which are outlined below, as well as the role of ASI Standards in addressing these impacts.
Greenhouse gas emissions
Existing primary aluminium production processes are energy intensive by nature. The main source of energy consumption during production is the electricity used for the electrolysis process. During the refining of alumina from bauxite ore, a significant amount of energy is also required to produce the solution of bauxite in caustic soda, for the calcination process and for the recovery of caustic soda after use. As energy costs are a major part of overall production costs, improved energy efficiency is essential for the aluminium industry, both from an economic and environmental point of view. Improved energy efficiency will also reduce indirect emissions from production of the electricity used in the electrolysis process.
Primary aluminium production results in associated direct greenhouse gas emissions from the use of fossil fuels in the alumina calcination process, as well as indirect emissions from production of electricity used in the electrolysis process. Direct greenhouse gas emissions also arise from process-related conditions in electrolysis, such as consumption of anodes (CO2) and PFC emissions (PerFluoroCarbon) from anode effects. Reduction of greenhouse gas emissions from energy use and from the electrolysis processes is thus important to reduce the overall carbon footprint of primary aluminium.
ASI aims to contribute to the global effort for climate change action through its Certification program for the aluminium value chain. This is particularly important in light of the COP 21 agreement to keep global average temperatures below 2°C above pre-industrial levels and to pursue efforts to limit the temperature increase to 1.5°C. Approximately 80% of all GHG emissions in the aluminium industry worldwide relate to the energy-intensive smelting process.
The ASI Performance Standard includes two smelter-specific criteria. Smelters starting production after 2020 must achieve a level of Scope 1 and 2 GHG emissions below 8 tonnes CO2-eq per metric tonne of aluminium produced. Existing aluminium smelters that were in production before 2020 must achieve the 8 tonnes CO2-eq per metric tonne level by 2030. To put this in perspective, the current global average for aluminium ingot production is estimated to be 12 CO2-eq per metric tonne.
ASI has committed to explore what a 2°C compliant GHG emissions trajectory would look like for the aluminium sector. A GHG Working Group has been established to enable input and engagement with climate change experts, members and stakeholders to be taken into account in the next revision of the Performance Standard.
LOLS10在线直播下注The vast majority of the world’s bauxite comes from surface mines in tropical areas, where bauxite occurs in horizontal layers, normally beneath a few meters of overburden. Bauxite mining involves disturbance of relatively large land areas, which can include areas of high biodiversity value.
LOLS10在线直播下注Effective mitigation of biodiversity impacts from bauxite mining involves avoiding negative impacts to protected areas and areas with natural and critical habitats (including avoidance of invasive species), as well as rehabilitation of mined areas.
ASI’s standards set good practice requirements for biodiversity assessment and management, no-go areas for World Heritage Sites, and rehabilitation with best available techniques.
ASI has committed to explore expansion of the ASI Performance Standard in the areas of ecosystem services and no-go areas ahead of the next revision process. A Biodiversity and Ecosystem Working Group is being established in early 2018 to enable input and engagement with biodiversity experts, members and stakeholders to be taken into account.
Recycling and material stewardship
LOLS10在线直播下注Aluminium is 100% recyclable and experiences no loss of properties or quality during the recycling process. Recycling aluminium also uses only 5% of the energy used to created new aluminium and emits only 5% of the greenhouse gases. Approximately 75% of the aluminium ever produced is still in use today.
LOLS10在线直播下注The majority of aluminium is used in products with very long use phases, for example transportation products that have a typical lifetime of 20 years or buildings with lifetimes of approximately 50 years.
Recycling of post-consumer scrap and waste requires a number of conditions, including the availability of systems to collect and sort used materials, and the adequate design of products that enable classification and recycling, among others.
ASI’s standards place requirements on downstream companies that design and produce consumer and commercial goods to consider future recyclability and support society’s efforts to increase recycling.
Indigenous peoples' rights
LOLS10在线直播下注Mining and mining-related activities (exploration, development, resource extraction, processing, transportation and waste disposal) often take place on, or near, indigenous lands. Mining or large-scale industrial development requires access to land and water that is often the basis of livelihoods for local communities. Major industrial developments can have significant adverse impacts on indigenous groups and/or vulnerable groups and individuals, affecting their rights to self-determination, infringing on their lands, territories and resources, and threatening their ability to maintain their culture, including their cultural heritage and recognition of their distinct identities.
ASI has convened an Indigenous Peoples Advisory Forum (IPAF) as part of its formal governance structure. IPAF representatives liaise with both the ASI Board and Standards Committee on matters relating to standards setting, the ASI Complaints Mechanism, and the broader involvement of indigenous peoples in ASI’s programs. ASI’s standards set good practice requirements for respect of Indigenous Peoples Rights, Free Prior Informed Consent (FPIC), and sacred and cultural heritage.
Between two and four tonnes of bauxite are required to produce one tonne of alumina. Once the alumina is extracted from the bauxite, the remaining bauxite residue is stored in landfills. Disposal of the bauxite residue is a challenging aspect of alumina production.
Aluminium smelters also generate significant quantities of solid waste. One of the main sources of waste production during the smelting process is ‘spent pot lining’ (SPL) from the relining of pots, which takes place every five-to-eight years. Leading companies minimise the generation of SPL by extending life times of the pots, and ensure proper handling of SPL waste through treatment or use by other industries, such as the cement industry.
ASI’s standards set good practice requirements for both types of wastes, and encourages alternatives to landfill.